MUET logo

Effect of Activated Carbon Content Derived From Coconut Shell and Water to Binder Ratios on The Workability of Mortar Mixtures

Authors

  • Tahir Yousef Omar Ahmed

    Faculty of Civil Engineering, University Teknologi Malaysia, Johor
    Author

  • Azman Mohammed

    Faculty of Civil Engineering, University Teknologi Malaysia, Johor
    Author

  • Nur Hafizah A. Khalid

    Faculty of Civil Engineering, University Teknologi Malaysia, Johor
    Author

  • Milad Hafezolghorani

    Dura Technology Sdn. Bhd., Chemor, Perak, Malaysia
    Author

DOI:

https://doi.org/10.22581/muet1982.0226

Keywords:

Workability , Cement , Activated Carbon , Water binder Ratios , Mortar components

Abstract

This study analyzes the workability and compressive strength of mortar with activated carbon (AC) at 0%, 5%, 10%, 15%, and 20% cement substitution. XRF analysis shows that AC includes silica (SiO2: 6.39%), calcium oxide (CaO: 9.64%), magnesium oxide (MgO: 29.20%), potassium oxide (K2O: 46.60%), and somewhat less iron oxide (Fe2O3: 2.06%) and aluminium oxide (Al2O3: 3.34%), which improves pozzolanic reactivity and its initial stage AC has a finer particle size distribution than cement, with a high specific surface area (1,016.38 m2/g) and pore size (2.71 nm), suggesting potential advantages in particle packing and hydration kinetics. The flow table test indicated that workability increased with greater water-to-binder (W/B) ratios for all AC concentrations, from 13.54% for the control to 14.84% for 10% AC at W/B = 0.50 and to 22.74% to 23.70% at W/B = 0.65. These findings imply AC inclusion had no impact on fresh mortar flow. In testing, the 5% AC mix at W/B = 0.55 exhibited a maximum strength of ≈38 MPa, 8% greater than the control. AC increased modest strength losses. AC can augment cementitious materials to increase mechanical performance and workability at suitable replacement levels, saving cement consumption costs and benefiting the environment.

Downloads

References

[1] E. Paul, "Influence of superplasticizer on workability and strength of ambient cured alkali activated mortar," Cleaner Materials, vol. 6, p. 100152, 2022.

[2] A. M. Zeyad, "Sustainable concrete Production: Incorporating recycled wastewater as a green building material," Construction and Building Materials, vol. 407, p. 133522, 2023.

[3] P. V. Mane, R. M. Rego, P. L. Yap, D. Losic, and M. D. Kurkuri, "Unveiling cutting-edge advances in high surface area porous materials for the efficient removal of toxic metal ions from water," Progress in Materials Science, p. 101314, 2024.

[4] Z. Pan, M. Tan, G. Zheng, L. Wei, Z. Tao, and Y. Hao, "Effect of silica fume type on rheology and compressive strength of geopolymer mortar," Construction and Building Materials, vol. 430, p. 136488, 2024.

[5] A. Lubis, M. Aswin, and G. C. R. Hasibuan, "WORKABILITY INVESTIGATION ON THE FRESH MIX OF ECC MORTAR AND CRUMB RUBBER (CR)-ECC BASED ON VARIATIONS OF PALM SHELL ASH, RIVER SAND, AND CEMENT," Journal of Syntax Literate, vol. 9, no. 5, 2024.

[6] S. Mehmood and F. Butt, "Effect of steel fibers on heat of hydration and mechanical properties of concrete containing Fly Ash," Mehran University Research Journal of Engineering & Technology, vol. 38, no. 1, pp. 83-94, 2019.

[7] G. Jia, Y. Wang, and F. Yang, "A review on the application of circulating fluidized bed fly ash in building materials," Advances in Materials Science and Engineering, vol. 2022, no. 1, p. 7099430, 2022.

[8] A. Aspiazu-Méndez, N. A. Cisneros-Cárdenas, C. Pérez-Rábago, A. M. Pat-Espadas, F. Manzini-Poli, and C. A. Estrada, "Analysis of the solar pyrolysis of a walnut shell: insights into the thermal behavior of biomaterials," Energies, vol. 17, no. 6, p. 1435, 2024.

[9] S. Zhang, X. Qi, S. Guo, L. Zhang, and J. Ren, "A systematic research on foamed concrete: The effects of foam content, fly ash, slag, silica fume and water-to-binder ratio," Construction and Building Materials, vol. 339, p. 127683, 2022.

[10] J. Xi et al., "Role of silica fume on hydration and strength development of ultra-high performance concrete," Construction and Building Materials, vol. 338, p. 127600, 2022.

[11] S. Zhuang, Q. Wang, and M. Zhang, "Water absorption behaviour of concrete: Novel experimental findings and model characterization," Journal of Building Engineering, vol. 53, p. 104602, 2022.

[12] S. Ali, M. O. R. Siddiqui, and H. Ali, "Performance evaluation of flexible pavement using polyethylene terephthalate (PET)," Mehran University Research Journal Of Engineering & Technology, vol. 43, no. 3, pp. 126-135, 2024.

[13] H. Wu et al., "Effects of binder component and curing regime on compressive strength, capillary water absorption, shrinkage and pore structure of geopolymer mortars," Construction and Building Materials, vol. 442, p. 137707, 2024.

[14] M. A. Khan, A. Javed, and M. A. Choudhry, "Strength comparison of accelerated cured and normal cured fly-ash based concrete," Mehran University Research Journal of Engineering & Technology, vol. 39, no. 1, pp. 21-30, 2020.

[15] T. O. Ofwa, "Evaluating Superplasticizer Compatibility With Portland Pozzolana Cement CEM II/BP in Production of High Performance Concrete," University of Nairobi, 2022.

[16] O. Heinz and H. Heinz, "Cement interfaces: Current understanding, challenges, and opportunities," Langmuir, vol. 37, no. 21, pp. 6347-6356, 2021.

[17] N. Bazregar, Z. Garkani-Nejad, S. Maghsoudi, and M. Amiri, "Investigating the performance of silica fume as a supplementary cementitious material in the production of pozzolanic cement with the aim of achieving the maximum compressive strength," Asian Journal of Civil Engineering, vol. 25, no. 4, pp. 3747-3761, 2024.

[18] N. A. Jokhio, B. A. Memon, S. A. Mallah, M. Oad, M. A. Memon, and R. Bhanbhro, "Workability and strength of recycled aggregate concrete reinforced with nylon fibers," Mehran University Research Journal Of Engineering & Technology, vol. 43, no. 2, pp. 34-45, 2024.

[19] J. F. Gonzalez-Sanchez, B. Taşcı, J. Fernández, I. Navarro-Blasco, and J. Alvarez, "Improvement of the depolluting and self-cleaning abilities of air lime mortars with dispersing admixtures," Journal of Cleaner Production, vol. 292, p. 126069, 2021.

[20] M. A. Keerio, S. A. Abbasi, A. Kumar, N. Bheel, K. u. Rehaman, and M. Tashfeen, "Effect of silica fume as cementitious material and waste glass as fine aggregate replacement constituent on selected properties of concrete," Silicon, vol. 14, no. 1, pp. 165-176, 2022.

[21] E. El-Seidy, M. Chougan, Y. A. Al-Noaimat, M. J. Al-Kheetan, and S. H. Ghaffar, "The impact of waste brick and geo-cement aggregates as sand replacement on the mechanical and durability properties of alkali–activated mortar composites," Results in Engineering, vol. 21, p. 101797, 2024.

[22] P. Borisut, C. Tangsathitkulchai, and A. Nuchitprasittichai, "Dynamic of CO2 adsorption in a fixed bed of microporous and mesoporous activated carbon impregnated with sodium hydroxide and the application of response surface methodology (RSM) for determining optimal adsorption conditions," Environmental Science and Pollution Research, vol. 31, no. 9, pp. 13833-13855, 2024.

[23] Y. K. Verma, A. K. Singh, S. K. Singh, S. Dutta, and M. Paswan, "Comprehensive analysis of enhanced thermal and mechanical properties in vacuum pressure impregnated (VPI) treated Chimono bamboo fibers through surface treatment with sodium hydroxide and graphene oxide: in-depth characterization and insights into the performance of graphene oxide-based natural hybrid composites," Journal of Wood Chemistry and Technology, pp. 1-20, 2025.

[24] J. O. Ighalo et al., "Biochar from coconut residues: an overview of production, properties, and applications," Industrial Crops and Products, vol. 204, p. 117300, 2023.

[25] J. Fu et al., "Effects of temperature, oxygen and steam on pore structure characteristics of coconut husk activated carbon powders prepared by one-step rapid pyrolysis activation process," Bioresource technology, vol. 310, p. 123413, 2020.

[26] A. A. Jhatial, "Thermomechanical evaluation of sustainable foamed concrete incorporating palm oil fuel ash and eggshell powder," Journal of Engineering Research, vol. 9, no. 3A, 2021.

[27] s. shahidan, s. mangi, m. s. senin, s. mohd zuki, and m. wan ibrahim, "Characterization of tyre rubber ash and crumb as fine aggregate resource," Journal of Engineering Science and Technology, vol. 16, no. 1, pp. 510-526, 2021.

[28] E. Partlan et al., "Effect of bead milling on chemical and physical characteristics of activated carbons pulverized to superfine sizes," Water research, vol. 89, pp. 161-170, 2016.

[29] A. Ebadnejad, H. Dehghani, M. Hadizadeh, K. Ghorbani, and M. Sanaie, "Optimisation of the size distribution of ball mill product by modelling grinding variables using DX8 software," Mineral Processing and Extractive Metallurgy, vol. 130, no. 1, pp. 42-49, 2021.

[30] M. F. González, N. Saadatkhah, and G. S. Patience, "Experimental methods in chemical engineering: X‐ray fluorescence—XRF," The Canadian Journal of Chemical Engineering, vol. 102, no. 6, pp. 2004-2018, 2024.

[31] M. Bhatia et al., "Portable X-ray fluorescence as a rapid determination tool to detect parts per million levels of Ni, Zn, As, Se, and Pb in human toenails: a South India case study," Environmental Science & Technology, vol. 55, no. 19, pp. 13113-13121, 2021.

[32] P. Muthuswamy, "Influence of powder characteristics on properties of parts manufactured by metal additive manufacturing," Lasers in Manufacturing and Materials Processing, vol. 9, no. 3, pp. 312-337, 2022.

[33] S. H. Abro, "Effect of Niobium and Titanium addition on formation of second phase particles in CHQ steel using transmission electron microscope," Mehran University Research Journal Of Engineering & Technology, vol. 40, no. 1, pp. 31-37, 2021.

[34] N. Heinemann et al., "Enabling large-scale hydrogen storage in porous media–the scientific challenges," Energy & Environmental Science, vol. 14, no. 2, pp. 853-864, 2021.

[35] Q. Khan, U. Imran, J. L. Ullman, and W. A. Khokhar, "Turbidity removal through the application of powdered azadirachta indica (neem) seeds," Mehran University Research Journal of Engineering and Technology, vol. 42, no. 1, pp. 1-8, 2023.

[36] K. Nwachukwu, N. Mmonwuba, and E. Ogunjiofor, "Compressive Strength Investigation of PSA–MSA-Cement Concrete [PMCC] Using Kings-Scheffe’s (6, 2) Model," 2025.

[37] A. A. Aghajari et al., "Effect of multi-walled carbon nanotube/Porous Carbon/SiO2 on reinforcing of cement mortar matrix: Modeling studies of effective parameters," Journal of Building Engineering, vol. 78, p. 107758, 2023.

[38] W. Mahmood, A. Mohammed, K. Ghafor, and W. Sarwar, "Model technics to predict the impact of the particle size distribution (PSD) of the sand on the mechanical properties of the cement mortar modified with fly ash," Iranian Journal of Science and Technology, Transactions of Civil Engineering, vol. 45, pp. 1657-1684, 2021.

[39] S. Na, S. Lee, and S. Youn, "Experiment on activated carbon manufactured from waste coffee grounds on the compressive strength of cement mortars," Symmetry, vol. 13, no. 4, p. 619, 2021.

[40] B. Li, S. Hou, Z. Duan, L. Li, and W. Guo, "Rheological behavior and compressive strength of concrete made with recycled fine aggregate of different size range," Construction and Building Materials, vol. 268, p. 121172, 2021.

[41] M. Shahpari, P. Bamonte, and S. J. Mosallam, "An experimental study on mechanical and thermal properties of structural lightweight concrete using carbon nanotubes (CNTs) and LECA aggregates after exposure to elevated temperature," Construction and Building Materials, vol. 346, p. 128376, 2022.

[42] M. N. Azhar, L. A. Qureshi, and M. U. Rashid, "Investigating the strength and durability properties of one-way slabs incorporating marble dust as cement replacement material," Mehran University Research Journal Of Engineering & Technology, vol. 40, no. 4, pp. 775-792, 2021.

[43] J. Chen, P. L. Ng, A. Kwan, and L. Li, "Lowering cement content in mortar by adding superfine zeolite as cement replacement and optimizing mixture proportions," Journal of Cleaner Production, vol. 210, pp. 66-76, 2019.

[44] M. Aziminezhad, E. Mohamedelhassan, and M. Mahdikhani, "Multi-property response and optimisation of lightweight self-consolidating mortar containing silica fume and nano silica," European Journal of Environmental and Civil Engineering, vol. 28, no. 5, pp. 1163-1182, 2024.

Published

2025-10-28

Issue

Vol. 44 No. 4 (2025): October Issue

Section

Articles

License

Copyright (c) 2025 Mehran University Research Journal of Engineering and Technology

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

Effect of Activated Carbon Content Derived From Coconut Shell and Water to Binder Ratios on The Workability of Mortar Mixtures. (2025). Mehran University Research Journal of Engineering and Technology, 44(4), 58-67. https://doi.org/10.22581/muet1982.0226

Similar Articles

11-20 of 41

You may also start an advanced similarity search for this article.