Performance Assessment of Dry-Cell Oxyhydrogen (HHO) Production under Varying Electrical Operating Conditions
DOI:
https://doi.org/10.22581/0393Keywords:
Electrolyzer, Hydrogen, HHO, Dry Cell, Renewable Energy, KOHAbstract
Using hydrogen technology to split water with electrical energy is an environmentally friendly way to use energy. This project focuses on the production of hydrogen using a stack of cells with two electrodes forming an electrolyzer. A dry cell was used where the electrolyte was fed to the electrolyzer through gravity. In this experiment, various parameters influencing the production of hydrogen as oxyhydrogen gas in an electrolyzer cell were studied. These include applied voltage, current, electrolyzer temperature, and electrolyte concentration. Through the study, it was concluded that the optimum voltage of each cell of the stack needs to be between 2.0 and 2.2 volts. Also, temperatures above 60˚C provide additional overpotential due to kinetic effects and resistance, resulting in steam formation, which may accelerate electrode degradation. Furthermore, effective production of gas was observed with a 30 percent KOH electrolyte solution. These findings could be beneficial for developing the design and control mechanism of the electrolyzer.
Downloads
References
[1] F. Ausfelder and A. Bazzanella, “Hydrogen in the chemical industry,” Hydrogen Science and Technology: Materials, Processes, Systems and Technology, pp. 19–40, 2016.
[2] O. M. Butt, S. Bibi, M. S. Ahmad, H. S. Che, T. Zahid, S. Bibi, and N. Abd Rahim, “Hydrogen as potential primary energy fuel for municipal solid waste incineration for sustainable waste management,” IEEE Access, vol. 10, pp. 114586–114596, 2022.
[3] T. Sandalcı and Y. Karagöz, “Experimental investigation of the combustion characteristics, emissions and performance of hydrogen port fuel injection in a diesel engine,” International Journal of Hydrogen Energy, vol. 39, pp. 18480–18489, 2014.
[4] M. Yue, H. Lambert, E. Pahon, R. Roche, S. Jemei, and D. Hissel, “Hydrogen energy systems: A critical review of technologies, applications, trends and challenges,” Renewable and Sustainable Energy Reviews, vol. 146, p. 111180, 2021.
[5] M. David, C. Ocampo-Martínez, and R. Sánchez-Peña, “Advances in alkaline water electrolyzers: A review,” Journal of Energy Storage, vol. 23, pp. 392–403, 2019.
[6] M. Felgenhauer and T. Hamacher, “State-of-the-art of commercial electrolyzers and on-site hydrogen generation for logistic vehicles in South Carolina,” International Journal of Hydrogen Energy, vol. 40, pp. 2084–2090, 2015.
[7] R. P. Wibowo, “Comparative design analysis of dry-cell vs wet-cell HHO (Brown’s Gas) generators,” in Proceedings of the 8th International Conference on Applied Engineering (ICAE 2025), 2025, p. 397.
[8] A. K. El Soly, M. Gad, and M. El Kady, “Experimental investigation of hydrogen production performance using dry alkaline electrolyser,” International Journal of Ambient Energy, vol. 46, p. 2576822, 2025.
[9] A. Sudrajat, E. M. Handayani, N. Tamaldin, and A. K. M. Yamin, “Principle of generator HHO hybrid multistack type production technologies to increase HHO gas volume,” in SHS Web of Conferences, 2018, p. 02016.
[10] M. Carmo, D. L. Fritz, J. Mergel, and D. Stolten, “A comprehensive review on PEM water electrolysis,” International Journal of Hydrogen Energy, vol. 38, pp. 4901–4934, 2013.
[11] S. P. Badwal, S. Giddey, and C. Munnings, “Emerging technologies, markets and commercialization of solid-electrolytic hydrogen production,” Wiley Interdisciplinary Reviews: Energy and Environment, vol. 7, p. e286, 2018.
[12] O. M. Butt, M. S. Ahmad, H. S. Che, and N. A. Rahim, “Usage of on-demand oxyhydrogen gas as clean/renewable fuel for combustion applications: A review,” International Journal of Green Energy, vol. 18, pp. 1405–1429, 2021.
[13] M. Schalenbach, A. R. Zeradjanin, O. Kasian, S. Cherevko, and K. J. Mayrhofer, “A perspective on low-temperature water electrolysis—challenges in alkaline and acidic technology,” International Journal of Electrochemical Science, vol. 13, pp. 1173–1226, 2018.
[14] S. S. Kumar and K. S. Kumar, “Optimization and control of fuel by producing brown gas by HHO generating device controlled by VHDL and implemented in FPGA,” International Journal of Mechanical Engineering and Robotics Research, vol. 4, p. 154, 2015.
[15] M. S. Ahmad, O. M. Butt, N. A. Rahim, K. Krismadinata, R. Zainul, A. Qayoom, and S. Y. Wong, “Predicting relationship among hydrogen flame length, flame ports, and volume flow for efficient burner design: An experimentally validated theoretical approach,” Journal of Medicinal and Pharmaceutical Chemistry Research, vol. 5, pp. 1109–1119, 2023.
[16] T. Prisecaru, C. Dica, M. Teodorescu, M. Prisecaru, L. Mihaescu, and V. Berbece, “Experimental validation of an HHO gas cutting flame CFD model,” Technology, vol. 46, pp. 41–47, 2004.
[17] T. Nabil and M. M. K. Dawood, “Enabling efficient use of oxy-hydrogen gas (HHO) in selected engineering applications; transportation and sustainable power generation,” Journal of Cleaner Production, vol. 237, p. 117798, 2019.
[18] A. M. Mousa, H. A. Sayed, K. A. Ali, N. S. Elkaoud, and W. A. Mahmoud, “Energy-conversion efficiency for producing oxy-hydrogen gas using a simple generator based on water electrolysis,” Scientific Reports, vol. 14, p. 25312, 2024.
[19] W. Mughal, P. Ji, U. Rauf, L. Junping, A. Waheed, and P. Kumar, “Stability and performance investigation using different electrode configurations and electrolyte compositions in an oxyhydrogen gas generator,” RSC Advances, vol. 14, pp. 39131–39141, 2024.
[20] M. Usman, M. Farooq, M. Naqvi, M. W. Saleem, J. Hussain, S. R. Naqvi, S. Jahangir, H. M. Jazim Usama, S. Idrees, and A. Anukam, “Use of gasoline, LPG and LPG-HHO blend in SI engine: A comparative performance for emission control and sustainable environment,” Processes, vol. 8, p. 74, 2020.
[21] B. Subramanian and S. Ismail, “Production and use of HHO gas in IC engines,” International Journal of Hydrogen Energy, vol. 43, pp. 7140–7154, 2018.
[22] O. M. Butt, M. S. Ahmad, T. K. Lun, H. S. Che, H. Fayaz, N. Abd Rahim, K. K. Koziol, N. Radwan, M. A. Khan, and N. A. Khan, “A comparative study based on performance and techno-economic analysis of different strategies for PV-Electrolyzer (green) hydrogen fueling incinerator system,” Waste Management, vol. 156, pp. 1–11, 2023.
[23] A. Rimkus, J. Matijošius, M. Bogdevičius, Á. Bereczky, and Á. Török, “An investigation of the efficiency of using O2 and H2 (hydroxyl gas, HHO) additives in a CI engine operating on diesel fuel and biodiesel,” Energy, vol. 152, pp. 640–651, 2018.
[24] K. Zeng and D. Zhang, “Recent progress in alkaline water electrolysis for hydrogen production and applications,” Progress in Energy and Combustion Science, vol. 36, pp. 307–326, 2010.
[25] N. H. Fayez, M. Qenawy, H. M. Mustafa, M. Shehadeh, M. Taha, and A. Abdelbaky Elbatran, “Optimization of a wet-cell electrolyzer for efficient oxyhydrogen (HHO) gas production: A step towards sustainable green energy solutions,” Scientific Reports, vol. 16, p. 12374, 2026.
Published
Issue
Section
License
Copyright (c) 2026 Mehran University Research Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Osama Majeed Butt, Muhammad Mohsin, Rasmia Irfan, Husnain Ashfaq, Kashif Habib, A comparative simulative study to determine controller schemes of static var compensator (svc) for stability of power system , Mehran University Research Journal of Engineering and Technology: Vol. 44 No. 3 (2025): July Issue
Similar Articles
- Najeeb Anjum Soomro, Sun Xianda, Dong Wanbai, Darya Khan Bhutto, Tahmina Fatima Siddiqui, Najeebullah Lashari, Afroze Khatoon, Zhang Rui, Yin Duo, Mineral transformation of Thar and Lakhra Coals: Enhancing GCV and BTU for Sustainable energy applications , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 4 (2026): October Issue
- Ashfaque Ahmed Baloch, Fahad Azim, Muhammad Yousuf Irfan Zia, Data-Driven Assessment of Renewable Energy Deployment and Emission Reduction in South Asia , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 3 (2026): July Issue
- Rana Saeed Ahmad, Haroon Rasheed, Raja Masood Larik, Optimal Power Flow and Short-Circuit Analysis in Hybrid Renewable-Powered DC Microgrids using Modular Multilevel Converters , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 1 (2026): January Issue
- Shahnila Badar, Dur Muhammad Soomro, Performance analysis of a Novel Vehicle-To-Grid Technology Architecture in Power Systems , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 2 (2026): April Issue
- Saeed Ahmad Rana, Haroon Rasheed, State-Space Modeling and Stability Analysis of MMC-Based Distributed Generation Units in Islanded Microgrids , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 2 (2026): April Issue
- Rana Saeed Ahmad, Haroon Rasheed, Coordinated Energy Management of MMC-Based DC Microgrids using Particle Swarm Optimization , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 3 (2026): July Issue
- Abdul Jabbar Memon, Mukhtiar Ahmed Mahar, Abdul Sattar Larik, Muhammad Mujtaba Shaikh, Design and Performance Analysis of Reduced Device Count Cascaded Half Bridge Multilevel Inverter , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 2 (2026): April Issue
- Ashfaque Ahmed Baloch, Fahad Azim, Muhammad Yousuf Irfan Zia, A hybrid harmonic mitigation strategy for smart grid integration of solar PV systems in developing power networks , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 1 (2026): January Issue
- Muhammad Ismail Marri, Najeeb Ur Rehman Malik, Attaullah Khidrani, Particle Swarm Optimization and Hybrid Reinforced Learning–Based Current Compensation for Brushless Doubly-Fed Induction Generators Under Low Voltage Ride-Through and Transient Conditions , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 4 (2026): October Issue
- Murad Zulfiqar, Abdul Sattar Jamali, Qadir Bakhsh Jamali, Sadam Hussain Soomro, Ali Murtaza Ansari, Imdad Ali Memon, Analysis of Tool Wear Mechanisms and Surface Roughness in High Speed Hard Turning of AISI 4340 Steel Using PVD Coated Carbide Inserts , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 2 (2026): April Issue
You may also start an advanced similarity search for this article.