MUET logo

Thermal analysis for Civil Structural Health Monitoring of Concrete Structure in the Presence of Imprecise Values

Authors

  • Jeba Fariha Islam

    Department of Hydraulic and Water Resources Engineering, China Three Gorges University, China
    Author

  • Abdullah Afzal

    University of the Punjab, Lahore, Pakistan
    Author

  • Sadik Md Nafis

    Department of Hydraulic Engineering, School of Civil Engineering, Tianjin University, China
    Author

  • Jamil Afzal

    International Islamic University Malaysia, Malaysia
    Author
    https://orcid.org/0000-0002-5640-0578

DOI:

https://doi.org/10.22581/0474

Keywords:

Thermal Analysis, Neelum Jhelum Hydropower Project, Heat of Hydration, Internal flow Theory , Neutrosophic Analysis

Abstract

In the construction of massive concrete structures such as dams, bridges, foundations, retaining walls, and nuclear power plant containment structures, temperature control is one of the most critical engineering challenges. This is mainly due to the heat of hydration, which is the heat released when cement reacts with water during the hydration process. This creates temperature gradients and tensile stresses that exceed the tensile strength of concrete, causing cracks. Cracks reduce durability, allow water ingress, and can cause long-term structural weaknesses. Engineers mitigate this through material selection, construction practices, and artificial cooling methods, i.e., pipe cooling. A numerical model was created in this work for the thermal analysis of mega concrete structures with pipeline cooling systems, and the robustness was assessed via a neutrosophic approach. Pipe modeling was done using a line element, and for determining the thermal fluctuation of water being used, the internal flow theory was adopted. The projected outcomes were compared with the measurement statistics from the Neelam Jehlum hydropower project's bypass tunnel concrete foundation. The expected outcomes and the site analysis information demonstrated high consistency. Neutrosophic sensitivity analysis also confirms that the modeled coefficients were highly robust.

Downloads

References

[1] Afzal, J., M. Albassam, and M. Aslam, Enhancing dam safety analysis through neutrosophic thermal analysis. Advances and Applications in Discrete Mathematics, 2024. 41(6): p. 477-492.

[2] Afzal, J., et al., Effects of dam on temperature, humidity and precipitation of surrounding area: a case study of Gomal Zam Dam in Pakistan. Environmental Science and Pollution Research, 2023. 30(6): p. 14592-14603.

[3] Dwivedi, P., et al., Advanced cooling techniques of PV modules: A state of art. Case studies in thermal engineering, 2020. 21: p. 100674.

[4] Afzal, J., et al., A complex wireless sensors model (CWSM) for real time monitoring of dam temperature. Heliyon, 2023. 9(2).

[5] Ouyang, J., et al., Application of distributed temperature sensing for cracking control of mass concrete. Construction and Building Materials, 2019. 197: p. 778-791.

[6] Kogbara, R.B., et al., A state-of-the-art review of parameters influencing measurement and modeling of skid resistance of asphalt pavements. Construction and Building Materials, 2016. 114: p. 602-617.

[7] Schindler, A.K. and B. Frank McCullough, Importance of concrete temperature control during concrete pavement construction in hot weather conditions. Transportation Research Record, 2002. 1813(1): p. 3-10.

[8] Kayondo, M., R. Combrinck, and W. Boshoff, State-of-the-art review on plastic cracking of concrete. Construction and Building Materials, 2019. 225: p. 886-899.

[9] Kazemi, M., S.F. Kabir, and E.H. Fini, State of the art in recycling waste thermoplastics and thermosets and their applications in construction. Resources, Conservation and Recycling, 2021. 174: p. 105776.

[10] Folch, C., Hydropolitics: The Itaipu Dam, sovereignty, and the engineering of modern South America. Vol. 20. 2019: Princeton University Press.

[11] Zhang, S., et al., Numerical simulation of failure modes of concrete gravity dams subjected to underwater explosion. Engineering Failure Analysis, 2014. 36: p. 49-64.

[12] Keaney, G.M.J., Experimental study of the evolution of permeability in rocks under simulated crustal stress conditions. 2000: University of London, University College London (United Kingdom).

[13] Jaafar, M., et al., Development of finite element computer code for thermal analysis of roller compacted concrete dams. Advances in Engineering Software, 2007. 38(11-12): p. 886-895.

[14] Ri, N.-H., et al., A nonlinear local equivalent stress method in stress analysis of concrete gravity dam. Results in Physics, 2019. 12: p. 1011-1014.

[15] Wasif Ali, N.u.A.B., et al., Analysis of Land Surface Temperature Dynamics in Islamabad by Using MODIS Remote Sensing Data. Sustainability, 2022. 14(16): p. 9894.

[16] Žvanut, P., G. Turk, and A. Kryžanowski, Thermal analysis of a concrete dam taking into account insolation, shading, water level and spillover. Applied Sciences, 2021. 11(2): p. 705.

[17] Wang, L., et al., The influence of fiber type and length on the cracking resistance, durability and pore structure of face slab concrete. Construction and building materials, 2021. 282: p. 122706.

[18] Coughenour, C., N. Coleman, and A. Taylor, In the shadow of the dam–Hydrology of the Little Conemaugh river and its South Fork, with insights about past and future flooding. Heliyon, 2022. 8(9): p. e10679.

[19] Gawin, D., F. Pesavento, and B.A. Schrefler, Hygro‐thermo‐chemo‐mechanical modelling of concrete at early ages and beyond. Part I: hydration and hygro‐thermal phenomena. International journal for numerical methods in engineering, 2006. 67(3): p. 299-331.

[20] Khoury, G., Polypropylene fibres in heated concrete. Part 2: Pressure relief mechanisms and modelling criteria. Magazine of concrete research, 2008. 60(3): p. 189-204.

[21] van den Berg, S.J., Investigation Into, & Analysis of Temperature & Strain Data for Coal Mine Seal Material During Curing. 2022.

[22] Khudhair, A.M. and M. Farid, A review on energy conservation in building applications with thermal storage by latent heat using phase change materials. Thermal Energy Storage with Phase Change Materials, 2021: p. 162-175.

[23] Hager, I., et al., The influence of aggregate type on the physical and mechanical properties of high‐performance concrete subjected to high temperature. Fire and materials, 2016. 40(5): p. 668-682.

[24] Lindmark, S., Mechanisms of salt frost scaling of Portland cement-bound materials: Studies and hypothesis. 1999, Lund University.

[25] Kim, S.G., Effect Of Heat Generation From Cement Hydration On Mass Concrete. pdf.

[26] Snyder, W.H., Guideline for fluid modeling of atmospheric diffusion. Vol. 81. 1981: Environmental Sciences Research Laboratory, Office of Research and ….

[27] Idrees, R. and S. Bashir, A New Generalization of Exponentiated Exponential Distribution using Quantile Functions. SCOPUA Journal of Applied Statistical Research, 2025. 1(1).

[28] Guo, L., et al., Thermal conductivity and heat transfer coefficient of concrete. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011. 26(4): p. 791-796.

[29] Ozawa, H., et al., The second law of thermodynamics and the global climate system: A review of the maximum entropy production principle. Reviews of Geophysics, 2003. 41(4).

[30] Kim, J.K., K.H. Kim, and J.K. Yang, Thermal analysis of hydration heat in concrete structures with pipe-cooling system. Computers & Structures, 2001. 79(2): p. 163-171.

[31] Zhang, W., et al., Numerical study on heat storage and production effects of the aquifer thermal energy storage (ATES) system based on reservoir reconstruction. Energy, 2025. 316: p. 134549.

[32] Cao, C., et al., Graded heating operation strategy study of geothermal ice melting system considering the temperature gradient of bridge concrete structures. Applied Thermal Engineering, 2025. 264: p. 125424.

[33] SAO, R.B., Introduction to Piping Engineering. 2025: Ram Babu Sao.

[34] Zhao, J., Development of Sustainable Cement-based Grouts with Enhanced Sealing and Thermal Performance for Borehole Heat Exchangers. 2025.

[35] Ashrafzadeh, F., M. Razavi, and S. Tariverdilo, Seismic performance of rectangular RC water storage tanks using a coupled finite difference-finite element method (FDM-FEM): effect of wall flexibility. Engineering Structures, 2025. 337: p. 120513.

[36] Song, Z. and K. Wang, Case Study on Thermal Conductivity-Driven Cooling Optimization for Mass Concrete Raft Foundations in Loess Environments: Experimental and Numerical Validation. Case Studies in Thermal Engineering, 2025: p. 106938.

[37] Nashirudin, H.A., et al., Influence of TiO₂ Nanofluid Concentration on Friction Factor and Reynolds Number in Laminar–Turbulent Flow through 4 mm and 6 mm Acrylic Pipes. International Journal of Engineering Continuity, 2025. 4(1): p. 232-247.

[38] Assefa, E.Y. and A.H. Tesfay, Synergetic Improvement of Blade Entry and Water Admission Angles for High Efficiency Cross-Flow Turbines in Micro-Hydropower Applications. Energies, 2025. 18(17): p. 4540.

[39] Borgnakke, C., Fundamentals of thermodynamics. 2025: John Wiley & Sons.

[40] van der Heijde, B., et al., Dynamic equation-based thermo-hydraulic pipe model for district heating and cooling systems. Energy Conversion and Management, 2017. 151: p. 158-169.

[41] Mondol, A., et al., An insight into Newton's cooling law using fractional calculus. Journal of Applied Physics, 2018. 123(6).

[42] Ansari, R., Analysis of hydro-hazard extremes hotspots across Upper Jhelum Basin and possible mitigation measures. 2024.

[43] Feng, G.-L., et al., Microseismic characteristics of rockburst development in deep TBM tunnels with alternating soft–hard strata and application to rockburst warning: A case study of the Neelum–Jhelum hydropower project. Tunnelling and Underground Space Technology, 2022. 122: p. 104398.

[44] Afzal, J., et al., Statistical Analysis of Foreign Investment Using Neutrosophic Interval Based Approach. Neutrosophic Sets and Systems, 2025. 79(1): p. 14.

[45] Firdous, A. and H.K. Maryam, Neutrosophic Logic Reveals Ontological Indeterminacy in Quantum Systems. Journal of Engineering, Science and Technological Trends, 2025. 2(3).

Published

2026-04-01

Issue

Vol. 45 No. 2 (2026): April Issue

Section

Articles

License

Copyright (c) 2026 Mehran University Research Journal of Engineering and Technology

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

Thermal analysis for Civil Structural Health Monitoring of Concrete Structure in the Presence of Imprecise Values. (2026). Mehran University Research Journal of Engineering and Technology, 45(2), 52-61. https://doi.org/10.22581/0474

Similar Articles

21-30 of 66

You may also start an advanced similarity search for this article.