MUET logo

Recycled Hybrid Fiber Reinforced Concrete Modified with Nano Zirconia: Mechanical Performance and Pavement Application

Authors

  • Hafiz Muhammad Saud

    Department of Civil Engineering, Bahauddin Zakariya University, Multan, Pakistan
    Author

  • Tahir Sultan

    Department of Civil Engineering, Bahauddin Zakariya University, Multan, Pakistan
    Author

  • Abdul Waqar Rajput

    College of Textile Engineering, Bahauddin Zakariya University, Multan, Pakistan
    Author

  • Ammad Hassan Khan

    Department of Transportation Engineering and Management, Main Campus UET Lahore, Pakistan
    Author

  • Muhammad Sabeeh Ul Zaman

    Department of Civil Engineering, Bahauddin Zakariya University, Multan, Pakistan
    Author

DOI:

https://doi.org/10.22581/0625

Keywords:

Hybrid Fibers , Recycled Fibers , Nano Modified Concrete , Sustainable Rigid Pavement , Pavement Thickness

Abstract

Conventional plain concrete has a relatively low post cracking flexural resistance and therefore required larger pavement thickness. Hybrid fiber reinforced concrete using Recycled Tire Steel Fiber (RTSF) and Recycled Nylon Fiber (RNF) modified with Nano-ZrO₂ is evaluated in terms of its mechanical, structural and sustainability performance for overcoming such limitations and decreasing the amount of natural materials used in production of concrete. To improve the multi-scale crack-bridging capabilities, a number hybrid combinations were made by utilizing 1.5% total fibre volume and Nano-ZrO₂ 0.2% of weight of cement. All mixture's mechanical properties were assessed and utilized as input parameters for pavement thickness design in Street Pave software. The results showed that hybrid mixes' mechanical performance significantly improved in all areas, with compressive strength rising to around 127% and tensile strength in RTSF-rich blends reaching up to almost 200%. Flexural and residual flexural capabilities also dramatically boosted, especially in the hybrid RTSF1% + RNF0.5% combination that demonstrated the highest synergy in stiffness, ductility and post-crack load retention. Pavement slab thickness might be lowered by as much as 25–26% due to these strength benefits, which directly translated into enhanced structural efficiency. The cost analysis of basic concrete constituent materials showed that through optimization of thickness of slabs, about 25 percent of the cost of the material per unit pavement area could be reduced.

Downloads

References

[1] M. Henry and Y. Kato, “Understanding the regional context of sustainable concrete in Asia: Case studies in Mongolia and Singapore,” Resources, Conservation and Recycling, vol. 82, pp. 86–93, 2014.

[2] P. Shafigh, A. Javadi Pordesari, and M. Aslam, “Coconut shell: From waste to the best by its role in producing high-quality special concrete,” Construction and Building Materials, vol. 506, Art. no. 144944, Jan. 2026. doi: 10.1016/j.conbuildmat.2025.144944.

[3] W. Aziz, M. Aslam, M. F. Ejaz, M. Jahanzaib Ali, R. Ahmad, M. Wajeeh-ul-Hassan Raza and A. Khan, “Mechanical properties, drying shrinkage and structural performance of coconut shell lightweight concrete,” Structures, vol. 35, pp. 26–35, Jan. 2022, doi: 10.1016/j.istruc.2021.10.092.

[4] Z. Tang, W. Li, and V. W. Y. Tam, “Investigation on dynamic mechanical properties of fly ash/slag-based geopolymeric recycled aggregate concrete,” Composites Part B: Engineering, vol. 185, p. 107776, 2020.

[5] J. Sivamani and N. T. Renganathan, “Effect of fine recycled aggregate on the strength and durability properties of concrete modified through two-stage mixing approach,” Environmental Science and Pollution Research, 2021.

[6] R. Chan and A. M. Oda, “Analysis of potential use of fibre reinforced recycled aggregate concrete for sustainable pavements,” Journal of Cleaner Production, vol. 218, pp. 183–191, 2019.

[7] B. Ali and L. A. Qureshi, “Environmental and economic benefits of steel, glass, and polypropylene fiber reinforced cement composite application in jointed plain concrete pavement,” Composites Communications, p. 100437, 2020.

[8] M. Khan and M. Cao, “Efficiency of basalt fiber length and content on mechanical and microstructural properties of hybrid fiber concrete,” Fatigue & Fracture of Engineering Materials & Structures, 2021.

[9] F. Köksal and F. Altun, “Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes,” Construction and Building Materials, vol. 22, pp. 1874–1880, 2008.

[10] H. Zhong and M. Zhang, “Experimental study on engineering properties of concrete reinforced with hybrid recycled tyre steel and polypropylene fibres,” Journal of Cleaner Production, vol. 259, p. 120914, 2020.

[11] Y. M. Alshkane and S. K. Rafiq, “Correlation between destructive and non-destructive tests on the mechanical properties of different cement mortar mixtures incorporating polyethylene terephthalate fibers,” Sulaimania Journal of Engineering Sciences, vol. 4, 2017.

[12] F. Alrshoudi, H. Mohammadhosseini, R. Alyousef, H. Alghamdi, Y. R. Alharbi, and A. Alsaif, “Sustainable use of waste polypropylene fibers and palm oil fuel ash in the production of novel prepacked aggregate fiber-reinforced concrete,” Sustainability, vol. 12, p. 4871, 2020.

[13] K. M. Liew and A. Akbar, “The recent progress of recycled steel fiber reinforced concrete,” Construction and Building Materials, vol. 232, p. 117232, 2020.

[14] J. Ahmad, O. Zaid, F. Aslam, R. Martínez-García, Y. M. Alharthi, M. Hechmi, E. I. Ouni, R. F. Tufail, and I. A. Sharaky, “Mechanical properties and durability assessment of nylon fiber reinforced self-compacting concrete,” Journal of Engineered Fibers and Fabrics, vol. 16, p. 15589250211062832, 2021.

[15] M. A. Farooq, M. Fahad, B. Ali, S. Ullah, M. H. El Ouni, and A. B. Elhag, “Influence of nylon fibers recycled from the scrap brushes on the properties of concrete: Valorization of plastic waste in concrete,” Case Studies in Construction Materials, vol. 16, p. e01089, 2022.

[16] M. H. Albashir, H. D. Aljaly, H. G. Elseed, N. Abdalaziz, Z. M. Sagyer, S. M. Alsaid and M. A. H. Dahab, “Impact ZrO₂ Nanoparticle Addition on Compressive Strength and Sturdiness of Concrete,” Int. J. Scientific Res. Engineering Dev. (IJSRED), vol. 6, no. 1, pp. 373-376, Jan.–Feb. 2023. Doi: 10.5281/zenodo.10828039.

[17] M. Kumar, M. Bansal, B. Krishan and R. Garg, “Microstructural and Mechanical Properties Enhancement of Nano-modified Concrete,” in Advances in Construction Management, pp. 14–27, Springer, 2025, Doi: 10.1007/978-981-96-4898-6_2.

[18] O. Kononova, A. Krasnikovs, R. Stonys, G. Sahmenko, and R. Vitols, “Investigation of influence of nano-reinforcement on the mechanical properties of composite materials,” Journal of Civil Engineering and Management, vol. 22, no. 3, pp. 425-433, 2016, doi:10.3846/13923730.2015.1106578.

[19] S. Guler and Z. F. Akbulut, “Effect of high temperature on hybrid glass and basalt fiber reinforced geopolymer cement mortars,” Journal of Building Engineering, vol. 57, p. 104809, 2022.

[20] H. M. Saud, T. Sultan, A. W. Rajput, A. H. Khan, and M. S. U. Zaman, “Durability assessment of recycled tire steel and nylon hybrid fiber-reinforced concrete modified with Nano-ZrO₂ for rigid pavement applications,” Kashf Journal of Multidisciplinary Research, vol. 2, no. 11, Nov. 2025, doi: 10.71146/kjmr694.

[21] S. Bawa and S. P. Singh, “Flexural performance and toughness evaluation of hybrid steel-polypropylene fibre reinforced self-compacting concrete,” Journal of Materials and Engineering Structures, vol. 5, no. 4, pp. 333–346, 2018.

[22] B. Ali, L. A. Qureshi, and S. U. Khan, “Flexural behaviour of glass fiber‑reinforced recycled aggregate concrete and its impact on the cost and carbon footprint of concrete pavement,” Construction and Building Materials, vol. 262, Art. no. 120820, Nov. 2020, doi: 10.1016/j.conbuildmat.2020.120820.

[23] B. Ali, L. A. Qureshi, R. Kurda, “Environmental and economic benefits of steel, glass and polypropylene fiber‑reinforced cement composite application in jointed plain concrete pavement,” Composites Communications, vol. 22, Art. no. 100437, 2020, doi: 10.1016/j.coco.2020.100437.

[24] ASTM C150/C150M-18, Standard Specification for Portland Cement, ASTM Int. West, Conshohocken, PA, 2018.

[25] A. Shafique and M. Khan, “Influence of nano-zirconia on the mechanical and durability properties of high-performance concrete containing nano-silica,” Materials Research Express, 2023.

[26] B. Ali, M. A. Farooq, R. Kurda, R. Alyousef, M. Noman, and H. Alabduljabbar, “Effect of type and volume fraction of recycled-tire steel fiber on durability and mechanical properties of concrete,” European Journal of Environmental and Civil Engineering, vol. 27, no. 5, pp. 1–22, 2022.

[27] S. S. Raza, L. A. Qureshi, B. Ali, A. Raza, M. M. Khan and H. Salahuddin, “Mechanical properties of hybrid steel–glass fiber-reinforced reactive powder concrete after exposure to elevated temperatures,” Arabian Journal for Science and Engineering, vol. 45, pp. 4285–4300, 2020, doi: 10.1007/s13369-020-04435-4.

[28] Z. Wang, H. Hu, P. Papastergiou, H. Angelakopoulos, M. Guadagnini and K. Pilakoutas, “Effect of fibre length on the mechanical properties of SFRC using recycled steel fibres,” Construction and Building Materials, vol. 214, pp. 74–83, Jul. 2019, doi: 10.1016/j.conbuildmat.2019.04.104.

[29] ASTM International, ASTM C143/C143M-20: Standard Test Method for Slump of Hydraulic-Cement Concrete, West Conshohocken, PA, USA, 2020.

[30] G. Behera, S. Panda and P. Kanda, “Effect of length of fibers on mechanical properties of normal strength concrete,” IOP Conference Series: Materials Science and Engineering, vol. 970, no. 1, Art. no. 012020, Nov. 2020, doi: 10.1088/1757-899X/970/1/012020.

[31] H. Z. Hassan and N. M. Saeed, “Fiber reinforced concrete: a state of the art,” Discover Materials, vol. 4, 2024, doi: 10.1007/s43939-024-00171-w.

[32] ASTM International, ASTM C138/C138M-17a: Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete, West Conshohocken, PA, USA, 2017.

[33] ASTM C39/C39M-23, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, USA, 2023.

[34] ASTM C496/C496M-17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, USA, 2017.

[35] ASTM C1609/C1609M-19, “Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading),” ASTM International, West Conshohocken, PA, USA, 2019.

[36] S. Haislip, “Municipal pavement design with StreetPave software,” Portland Cement Association, 2008.

[37] G. Robert, P.E. Packard, Thickness design for concrete highway and street pavements: Portland cement association (using ACPA thickness design tool streetpave), 2007.

Published

2026-04-01

Issue

Vol. 45 No. 2 (2026): April Issue

Section

Articles

License

Copyright (c) 2026 Mehran University Research Journal of Engineering and Technology

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

Recycled Hybrid Fiber Reinforced Concrete Modified with Nano Zirconia: Mechanical Performance and Pavement Application. (2026). Mehran University Research Journal of Engineering and Technology, 45(2), 134-145. https://doi.org/10.22581/0625

Similar Articles

11-20 of 39

You may also start an advanced similarity search for this article.