Performance Assessment of Dry-Cell Oxyhydrogen (HHO) Production under Varying Electrical Operating Conditions
DOI:
https://doi.org/10.22581/0393Keywords:
Electrolyzer, Hydrogen, HHO, Dry Cell, Renewable Energy, KOHAbstract
Using hydrogen technology to split water with electrical energy is an environmentally friendly way to use energy. This project focuses on the production of hydrogen using a stack of cells with two electrodes forming an electrolyzer. A dry cell was used where the electrolyte was fed to the electrolyzer through gravity. In this experiment, various parameters influencing the production of hydrogen as oxyhydrogen gas in an electrolyzer cell were studied. These include applied voltage, current, electrolyzer temperature, and electrolyte concentration. Through the study, it was concluded that the optimum voltage of each cell of the stack needs to be between 2.0 and 2.2 volts. Also, temperatures above 60˚C provide additional overpotential due to kinetic effects and resistance, resulting in steam formation, which may accelerate electrode degradation. Furthermore, effective production of gas was observed with a 30 percent KOH electrolyte solution. These findings could be beneficial for developing the design and control mechanism of the electrolyzer.
Downloads
References
[1] F. Ausfelder and A. Bazzanella, “Hydrogen in the chemical industry,” Hydrogen Science and Technology: Materials, Processes, Systems and Technology, pp. 19–40, 2016.
[2] O. M. Butt, S. Bibi, M. S. Ahmad, H. S. Che, T. Zahid, S. Bibi, and N. Abd Rahim, “Hydrogen as potential primary energy fuel for municipal solid waste incineration for sustainable waste management,” IEEE Access, vol. 10, pp. 114586–114596, 2022.
[3] T. Sandalcı and Y. Karagöz, “Experimental investigation of the combustion characteristics, emissions and performance of hydrogen port fuel injection in a diesel engine,” International Journal of Hydrogen Energy, vol. 39, pp. 18480–18489, 2014.
[4] M. Yue, H. Lambert, E. Pahon, R. Roche, S. Jemei, and D. Hissel, “Hydrogen energy systems: A critical review of technologies, applications, trends and challenges,” Renewable and Sustainable Energy Reviews, vol. 146, p. 111180, 2021.
[5] M. David, C. Ocampo-Martínez, and R. Sánchez-Peña, “Advances in alkaline water electrolyzers: A review,” Journal of Energy Storage, vol. 23, pp. 392–403, 2019.
[6] M. Felgenhauer and T. Hamacher, “State-of-the-art of commercial electrolyzers and on-site hydrogen generation for logistic vehicles in South Carolina,” International Journal of Hydrogen Energy, vol. 40, pp. 2084–2090, 2015.
[7] R. P. Wibowo, “Comparative design analysis of dry-cell vs wet-cell HHO (Brown’s Gas) generators,” in Proceedings of the 8th International Conference on Applied Engineering (ICAE 2025), 2025, p. 397.
[8] A. K. El Soly, M. Gad, and M. El Kady, “Experimental investigation of hydrogen production performance using dry alkaline electrolyser,” International Journal of Ambient Energy, vol. 46, p. 2576822, 2025.
[9] A. Sudrajat, E. M. Handayani, N. Tamaldin, and A. K. M. Yamin, “Principle of generator HHO hybrid multistack type production technologies to increase HHO gas volume,” in SHS Web of Conferences, 2018, p. 02016.
[10] M. Carmo, D. L. Fritz, J. Mergel, and D. Stolten, “A comprehensive review on PEM water electrolysis,” International Journal of Hydrogen Energy, vol. 38, pp. 4901–4934, 2013.
[11] S. P. Badwal, S. Giddey, and C. Munnings, “Emerging technologies, markets and commercialization of solid-electrolytic hydrogen production,” Wiley Interdisciplinary Reviews: Energy and Environment, vol. 7, p. e286, 2018.
[12] O. M. Butt, M. S. Ahmad, H. S. Che, and N. A. Rahim, “Usage of on-demand oxyhydrogen gas as clean/renewable fuel for combustion applications: A review,” International Journal of Green Energy, vol. 18, pp. 1405–1429, 2021.
[13] M. Schalenbach, A. R. Zeradjanin, O. Kasian, S. Cherevko, and K. J. Mayrhofer, “A perspective on low-temperature water electrolysis—challenges in alkaline and acidic technology,” International Journal of Electrochemical Science, vol. 13, pp. 1173–1226, 2018.
[14] S. S. Kumar and K. S. Kumar, “Optimization and control of fuel by producing brown gas by HHO generating device controlled by VHDL and implemented in FPGA,” International Journal of Mechanical Engineering and Robotics Research, vol. 4, p. 154, 2015.
[15] M. S. Ahmad, O. M. Butt, N. A. Rahim, K. Krismadinata, R. Zainul, A. Qayoom, and S. Y. Wong, “Predicting relationship among hydrogen flame length, flame ports, and volume flow for efficient burner design: An experimentally validated theoretical approach,” Journal of Medicinal and Pharmaceutical Chemistry Research, vol. 5, pp. 1109–1119, 2023.
[16] T. Prisecaru, C. Dica, M. Teodorescu, M. Prisecaru, L. Mihaescu, and V. Berbece, “Experimental validation of an HHO gas cutting flame CFD model,” Technology, vol. 46, pp. 41–47, 2004.
[17] T. Nabil and M. M. K. Dawood, “Enabling efficient use of oxy-hydrogen gas (HHO) in selected engineering applications; transportation and sustainable power generation,” Journal of Cleaner Production, vol. 237, p. 117798, 2019.
[18] A. M. Mousa, H. A. Sayed, K. A. Ali, N. S. Elkaoud, and W. A. Mahmoud, “Energy-conversion efficiency for producing oxy-hydrogen gas using a simple generator based on water electrolysis,” Scientific Reports, vol. 14, p. 25312, 2024.
[19] W. Mughal, P. Ji, U. Rauf, L. Junping, A. Waheed, and P. Kumar, “Stability and performance investigation using different electrode configurations and electrolyte compositions in an oxyhydrogen gas generator,” RSC Advances, vol. 14, pp. 39131–39141, 2024.
[20] M. Usman, M. Farooq, M. Naqvi, M. W. Saleem, J. Hussain, S. R. Naqvi, S. Jahangir, H. M. Jazim Usama, S. Idrees, and A. Anukam, “Use of gasoline, LPG and LPG-HHO blend in SI engine: A comparative performance for emission control and sustainable environment,” Processes, vol. 8, p. 74, 2020.
[21] B. Subramanian and S. Ismail, “Production and use of HHO gas in IC engines,” International Journal of Hydrogen Energy, vol. 43, pp. 7140–7154, 2018.
[22] O. M. Butt, M. S. Ahmad, T. K. Lun, H. S. Che, H. Fayaz, N. Abd Rahim, K. K. Koziol, N. Radwan, M. A. Khan, and N. A. Khan, “A comparative study based on performance and techno-economic analysis of different strategies for PV-Electrolyzer (green) hydrogen fueling incinerator system,” Waste Management, vol. 156, pp. 1–11, 2023.
[23] A. Rimkus, J. Matijošius, M. Bogdevičius, Á. Bereczky, and Á. Török, “An investigation of the efficiency of using O2 and H2 (hydroxyl gas, HHO) additives in a CI engine operating on diesel fuel and biodiesel,” Energy, vol. 152, pp. 640–651, 2018.
[24] K. Zeng and D. Zhang, “Recent progress in alkaline water electrolysis for hydrogen production and applications,” Progress in Energy and Combustion Science, vol. 36, pp. 307–326, 2010.
[25] N. H. Fayez, M. Qenawy, H. M. Mustafa, M. Shehadeh, M. Taha, and A. Abdelbaky Elbatran, “Optimization of a wet-cell electrolyzer for efficient oxyhydrogen (HHO) gas production: A step towards sustainable green energy solutions,” Scientific Reports, vol. 16, p. 12374, 2026.
Published
Issue
Section
License
Copyright (c) 2026 Mehran University Research Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Osama Majeed Butt, Muhammad Mohsin, Rasmia Irfan, Husnain Ashfaq, Kashif Habib, A comparative simulative study to determine controller schemes of static var compensator (svc) for stability of power system , Mehran University Research Journal of Engineering and Technology: Vol. 44 No. 3 (2025): July Issue
Similar Articles
- Noor Nabi, Sajjad Karim, Abdur Rehman, Muhammad Haneef, Performance Analysis of Medium Voltage Porcelain and Polymer Cut-out Fuse Insulators under Lightning Impulse Wave Forms , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 1 (2026): January Issue
- Bilal Tanveer, Sawera Samuel, Usman Pervaiz, Salman Ali Suhail, Muhammad Suleman, Enhancing the Soil Stability through the Incorporation of Waste Glass Powder , Mehran University Research Journal of Engineering and Technology: Vol. 44 No. 4 (2025): October Issue
- Abdul Rehman, Habib ur Rehman, Noor Muhammad Khan, Machine Learning Based Prediction of Hydraulic Jump Lengths in Stilling Basins for Barrages and Low-Head Hydraulic Structures , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 1 (2026): January Issue
- Tehmina Karamat, Mohsan Tanveer, Taimur Karamat, Muhammad Suleman, Performance optimization of multimedia services in wireless multimedia sensor networks (WMSN) at the socket level , Mehran University Research Journal of Engineering and Technology: Vol. 44 No. 4 (2025): October Issue
- Amir Rizvi , Ahmad Hussain , Abdul Rehman Abbasi , Development of a Novel Reliability-Centered Framework and Maintenance Strategies for the Asset Management and Sustainability of Rotary Equipment , Mehran University Research Journal of Engineering and Technology: Vol. 44 No. 4 (2025): October Issue
- Saifullah Samo, Sameh EZZT Mohamed Ali Bdran, Raheel Ahmed Nizamani, Zero-Shot Payload Adaptation for Robotic Manipulators via Domain-Randomized Deep Reinforcement Learning , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 2 (2026): April Issue
- Faizan Ali Abro, Zaheer Ahmed Almani, Muhammad Rehan Hakro, Saquaib Mustafa Almani, Slope Stability Assessment Using Drains: A PLAXIS 2D Analysis at MUET, Jamshoro , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 2 (2026): April Issue
- Rana Saeed Ahmad, Haroon Rasheed, Enhanced Hybrid MMC Integration into DC Microgrid for low voltage application , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 1 (2026): January Issue
- Aqsa Mehmood, Ali Tahir, Salman Atif, Ejaz Hussain, Farrukh Baig, Hafiz Syed Hamid Arshad, A Citizen Centered Perspective on Smart Mobility: Identifying Key Factors through the Technology Acceptance Model , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 3 (2026): July Issue
- Inamullah Maitlo, Safdar Ali, Sadam Ali Khichi, Imran Ali, Ghulamullah Maitlo, Imran Nazir Unar, Aspen HYSYS-based Modeling of Liquefied Natural Gas Production from an Indigenous Natural Gas Source , Mehran University Research Journal of Engineering and Technology: Vol. 45 No. 1 (2026): January Issue
You may also start an advanced similarity search for this article.